Steelcase Leap V2 Replacement Gas Cylinder – Standard & Higher Height Options

Steelcase Leap V2 Replacement Gas Cylinder – Standard or Higher Option

Need a replacement gas cylinder for your Steelcase Leap V2 ergonomic office chair? Whether your chair is sinking, no longer stays at your preferred height, or sits too low for your desk, Kate’s Furniture Australia offers two replacement gas cylinder options to suit different seating needs.

Choose the Standard Gas Cylinder for a conventional seat-height range or the Higher Gas Cylinder for a taller sitting position and increased clearance underneath the chair.

1. Standard Gas Cylinder

A replacement option for customers who want a conventional seat-height range for their Steelcase Leap V2 chair.

• Lowest seat height: Approximately 39.4 cm

• Highest seat height: Approximately 52.1 cm

• Suitable for: Customers who want a standard seat-height range for everyday office use.

2. Higher Gas Cylinder

Want your Steelcase Leap V2 chair to sit higher? The higher gas cylinder offers an increased seat-height range and greater clearance between the bottom of the cylinder housing and the floor.

• Lowest seat height: Approximately 50 cm

• Highest seat height: Approximately 65 cm

• Increased floor clearance: The greater gap between the bottom of the cylinder housing and the floor may be beneficial when using your chair on carpet, particularly where additional clearance is needed.

• Suitable for: Customers who need a higher sitting position or additional clearance underneath the chair.

Important: Carpet thickness, pile height, chair castors and floor conditions can affect chair movement and clearance. The higher gas cylinder does not guarantee suitability for every carpet type. Please check your chair's clearance and stability before use.

Seat-Height Measurements

All seat-height measurements are taken from the floor to the top of the seat.

Actual measurements may vary slightly depending on the chair, installation and measurement method.

Professional Gas Cylinder Replacement Service – Milperra, NSW

Don't want to replace the gas cylinder yourself? Kate’s Furniture offers a professional gas-cylinder replacement service at our Milperra, NSW 2214 location.

How to arrange professional fitting:

1. Purchase your preferred gas cylinder option.

2. Contact Kate’s Furniture after purchase to arrange an appointment.

3. Bring your Steelcase Leap V2 chair to our Milperra location for professional fitting, subject to appointment availability and compatibility confirmation.

Please contact us before travelling to confirm availability and arrange your appointment. The fitting service is separate from the cylinder purchase unless expressly included in your order.

Which Gas Cylinder Should You Choose?

Choose the Standard Gas Cylinder if:

• You want a conventional replacement seat-height range.

• Your existing chair height suits your desk and sitting position.

Choose the Higher Gas Cylinder if:

• You need your chair to sit higher.

• Your current seat height is too low for your workstation.

• You want additional clearance between the bottom of the cylinder housing and the floor, which may be helpful on carpet.

Before choosing the higher option, consider your desk height, leg length and ability to keep your feet comfortably supported.

Compatibility Information

This product is intended for Steelcase Leap V2 office chairs. Please confirm your chair model and gas-cylinder compatibility before purchasing. Do not assume compatibility with other Steelcase chair models.

The higher gas cylinder is an alternative replacement option offered by Kate’s Furniture Australia and is not represented as an official Steelcase accessory unless separately confirmed.